Teflon capillary rod (PTFE solid line) also known as Teflon wire / strip.
The smallest diameter can be 1MM, in the chemical industry, electroplating and other industries have a wide range of applications. There are two Teflon rods.
Diameter 4 --- 9mm rods selected by dispersion polymerization of polytetrafluoroethylene resin paste made by extrusion processing;
Diameter of 10-100mm rod selection of PTFE resin plunger extrusion made of extruded;
Diameter of 100mm above the diameter of the die made of processing.
Teflon rod PTFE rod is molded from sintered at room temperature.
Polytetrafluoroethylene in the known plastic has the best chemical resistance and dielectric properties, non-aging, non-stick, no load in the case of -180% ° C -
+ 260 ° C temperature, it has the lowest coefficient of friction in known solid materials.
Uses:
Used to make a variety of corrosive media in the work of gasket sealing and lubricating materials and the use of various frequencies of electrical insulation parts.
Product Specifications:
|
Project name
|
Unit
|
index
|
|
Apparent density
|
g/cm3
|
2.10～2.30
|
|
Tensile Strength
|
MPa
|
14.0
|
|
Elongation at break
|
%
|
140
|
Note: Apparent density is measured only when the rod diameter is larger than 16 mm.
Product specifications:
|
Diameter(mm)
|
Length(mm)
|
Tolerances allowed
|
|
1,2,3,4
|
>2000
|
+5.0
|
|
5,6,7,8,9
|
|
4,5,6,7,8,10,12,15,16,18,20,25,30
|
1000，2000
|
+3.60
|
|
35,40,45,50 ,55,60,65,70,75,80,85
|
|
90,95,100,110,120,130,140,150,160
|
|
55,60,65,70,75,80,85,90,95
|
100～600
|
+2.50
|
|
100,110,120,130,140,150,160
|
|
180,200,250,270,300,350,400
|
+2.0
|
